Maxstream's XBee™ and
XBee-PRO™ OEM RF modules are ZigBee/IEEE 802.15.4 compliant solutions that
satisfy the unique needs of low-cost, low-power wireless sensor networks. The
modules are easy-to-use, require minimal power and provide reliable delivery of
critical data between devices. Its small form factor saves valuable board
space.
XBee Series 1 is based on ZigBee/802.15.4 silicon from
Freescale®. Its 802.15.4 firmware feature set makes it ideal for
point-to-point, peer-to-peer, and point-to-multipoint (star) topologies. The
XBee Series 1 gives the user maximum control over network nodes and minimum
latency.
No configuration is necessary for out-of-box RF communications.
The module’s default configuration supports a wide range of data system
applications. Advanced configurations can be implemented using simple AT
commands.
The XBee-PRO series yields 2-3 times the range of the
standard product due to enhanced design and increased power output.
Features: (XBee / XBee-PRO)
ISM 2.4 GHz operating frequency 1 mW (0 dBm) power
output / 60mW (+18dbM)*
Indoor/Urban Range: up to 100' (30m) / 300'
(100m)
Outdoor/RF Line-of-sight Range: up to 300' (100m)/
1000' (300m)
Serial Data Rate: 1200-250Kbps
U.FL. RF Connector, Chip or Whip antenna
options
Industrial (-40 – 85° C) temperature
rating
Approved for use in the United States, Canada,
Australia, Japan* and Europe*
Advanced networking & low-power modes
supported
* XBee-PRO power output must be limited to 10mW for
operation within Europe or Japan.
)
